Lady Que's Big Blog of Wibbly Wobbly Timey Wimey Stuff.

Just a little corner of the net where I can hide away and exist I guess..

A little of this and a little of that- some of myself, some record of things I find interesting and helpful too.

Wednesday, September 16, 2015

Recipe: cold pressed coffee

So cold pressed coffee is a big deal in our house, but at 4 to 6 bucks for about 12 oz. it wasn't purchased often. So for hubby's birthday I decided to figure out how to make it, and it's really pretty easy once you get a method down.

1. Double layer cheese cloth cut in a big circle. This one is damp, and coffee stained- I wash and reuse it because I make a new pitcher every 2 to 3 days:

2. Grind coffee coarsely.. And heap in the center of your cheese cloth. I used about 1/3 bag beans (and at $6 per bag I can get about a gallon and a half out of it, so a buck a quart) a good ratio seems to be 1 part coffee to 3 or 4 parts water:
(We dig Peet's but any works. If you have preground it's okay too but might filter through the cheesecloth a bit)



3. Now gather it up around the edges like a bag, and use a rubber and to secure the top. I've used kitchen twine but it's a pain to tie up:

4. Place bag in a pitcher, and cover with ice:
( see it's there at the bottom :)

5. Fill with filtered tap water:

6. Let it sit out till the ice melts then throw it in the fridge. Let it steep about 36 hours. We tested steep times and our tastes ran to the 36 hour steep- but try it out at 18 to 48 hours to see what you like. We pour it into ball jars so he can grab and go to work, or into a lidded pitcher, etc.:
If you get sediment from too small a grind on the coffee, you can use a regular coffee filter inside a sieve or fold the sides together so you can hold it over your pitcher/cups. 

And enjoy cold! 

Note: I use the post steep coffee grounds in my garden. 

I also discovered that you can use a ball jar, lidded cup or whatever you like that won't spill and some empty tea bags ( like $2 for 100) and fill them up with coffee for individual servings. Steep 24 to 36 hours in the fridge. Pre ground works great here.. I use these a lot with my teas too. They do make re-usable but mine are compostable and disposable, so that's what I do:

Coat rack built in: notes (updated)

Planning to build a built in coat rack/shoe rack combo behind the front door. stain it Bombay mahogany to match the other stuff we're doing. 


Update: half the the rack done. Decided to separate it into two sections a tall shoe rack and a a coat hanger/shelf. I've finished the rack.. 





Now on to the coat rack. 

Tuesday, September 15, 2015

Fence replace/upgrade notes

I need for custom fence pieces 8 to 15 pickets, 2 - 2x4s, 4 side brackets at 1.50 each, screws, nails, and a package of L brackets at $3 each. 

5/8" x 5 1/2" x 6' Fence individual Pickets are $1.94


2x4 (treated)

These too look possible, is simple. I could cut them down if needed. 
I kind of hesitate to switch now, because we started one way, doing it custom. But keepers it would make life sooo much easier :(


Lowes has this nifty fence door/gate for $41.. Would need 3, or 4 if we add a gate in back



  
But this is also an option, depending on size. It is a more expensive option though:



Also looking at post caps: 
Plain for most of them.. 

But there are cool solar ones I want for the garden space. 

These are my favorites.. 




Monday, September 14, 2015

Halloween: skull wreath

This year we hit up the dollar store to make an LED skull and web wreath.. Super easy. 

8 LED foam skulls
1 metal edged spider web
Duct tape
Sewing pins

Removed big plastic spider from the web. Ick. 

I taped the skulls equidistant around the web, and anchored the tape with sewing pins (nothing wants to stick to glitter coated skulls very well) 

And done. Thought about adding ribbon or raffia, but I like this plain and simple. 
I will probably go back and add some super glue under the tape though. Love to super glue lol

Here's lights on first 


 then lights out, LED on (they strobe different colors)


We're going to hang it outside on Halloween for trick or treating :)

Sunday, August 30, 2015

Garden 2015: Grape vines

I'll admit I know squat about grapes.. I bought two nice vine that have come along well.. I think.

Last year they spent all their effort putting down roots, I think. Almost no growth up top but they were growing, albeit slowwww. 

This year the one vine that grew like 6 inches last year has sprouted up to my knee. The other, hardier vine is like a friggin wild bush! It's monsterously big..

So I started digging around and found this info. Shouldn't expect output for a while but it's all good- I get grapevine this fall when I prune.

http://m.almanac.com/plant/grapes

I'll upload pictures of my out of control grape vines later.. It's too dark now, and I'm probably fit for grape shaming lol I should have investigated sooner, but at least now they have a solid root base, and I was able to mulch well this spring so they were able to weather out the drought this year like champs. 


Notable link: great info on processing and canning:
http://extension.usu.edu/files/publications/publication/FN_2005_Harvest-11.pdf

Skyrim bathroom 008: there be dragons here

So you can't do Skyrim without dragons, because..


DRAGONS!!!

So we opted to go two ways: 

-Canvas for Alduin for the ceiling

-Sculpture/bas relief type for Paarthurnax to go over the door like he's watching the Throat of the World/High Hrothgar. 

There will be 3 canvases total: 2 sky (sm), one dragon (med). They are painted to look like the ceiling with 'comes the dawn' as a base coat, like walls/ceiling. I used 'homestead resort' and 'gossamer wings) to make clouds.

Paarthurnax is made of sculpey 3 clay, painted with acrylics and clear coat. 

-Alduin-

I used plain white canvas, penciled in my dragon body, and started painting around him with base coat. 

Base coat done, dry overnight. Smaller canvases are just solid base coat. 

To make clouds I used the tried and true, cheapo method of paper towel blotting :)



Clouds added:



Dragon detailed:

And the cloud panels:



Canvases hung up ( yay for command Velcro -soooo easy!):
Meant to look like he's circling the light.. 


-Paarthurnax-

I started with plain old white Sculpey III and started shaping. Body first, then adding some spikes and so on. The block is 2.5" x 2.5" if that gives you an idea of his size. Really it was trial and error, and this is what I got:

Not much change after I baked him for 2 hours at 235 (convection oven), but he's hardened like he should have. Yay!

Test fit on the door- discovered an issue. My measurement was off. Ugh. His wing broke at the joint, but it's all good.. Super glue before paint, so the wing sits at an angle so he fits. The door he's sitting on is in a corner, and my wing was slightly too long. 


But what's super cool- he's got a glow in the dark eye . DD was making glow stars for her Doctor WHO room with me while I worked on this, so thank you kiddo for sharing your sculpey and giving me the idea!


Wing fixed back on.. Paint next!

Base coat paint, after sanding a little:


Details- mind you I'm not the best painter, but he's not too bad:





Installed:

Tuesday, August 25, 2015

Skyrim bathroom 007: Winterhold sigil

So the request from the kids was more city sigils EVERYWHERE.. And thusly, Winterhelm over the light fixture was conceived. 

I'll admit this template/stencil was daunting for me.. Until I said to myself- white out. It made figuring connectors so much easier, and I simply added them in. 

Template on card stock

I used white out to make connector lines so that my stencil doesn't fall apart. Then I cut the stencil with an exacto knife. 

Yay, stencil done!

Traced it in pencil centered over the light fixture, and set up a second template as a reference guide for painting my outline.


Outline done, coat one.

Filled it in white, coat one. 

Fill in, coat two. 


Outline, coat two. 


Finished!


I also did a Falkreath sigil the same way: